Home Hardware › angel 39 1 2 x

Ekena Millwork 6 1/2 W x 12 1/8 H x 2 P Seville Angel Corner Onlay Left

Our appliques and onlays are the perfect accent pieces to cabinetry furniture fireplace mantels ceilings and more. Each pattern is carefully crafted after traditional and historical designs. Each polyurethane piece is easily installed just like wood... more

Hex Bolts Grade 5 Plain Finish 1 1/2 -6 x 2 1/2 (Quantity: 5 pcs) Fully Threaded UNC Thread (Thread Size: 1 1/2 ) x (Length: 2 1/2 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are FULLY threaded hex head cap screws Head Height:... more

Pacific Bearing 5/8 ID 2-1/2 OAW x 1.938 OAL x 1-5/8 OAH Open Single Pillow Block 1-15/16 Overall Length x 1-5/8 Overall Height x 2-1/2 Width

Pacific Bearing 5/8 ID 2-1/2 OAW x 1.938 OAL x 1-5/8 OAH Open Single Pillow Block 1-15/16 Inch Overall Length x 1-5/8 Inch Overall Height x 2-1/2 Inch Width more

Ekena Millwork 6 1/2 W x 4 3/8 BW x 2 1/2 D x 5 1/2 H Small Chesterfield Capital (Fits Pilasters up to 3 7/8 W x 1 D) Maple (2-Pack)

Modeled after original historical patterns and designs our carved wood capitals are beautiful accents to your complete millwork trim. Our wood capitals are hand carved finely sanded and can be easily painted or stained to match your existing millwork. more

Ekena Millwork 6 1/2 W x 4 3/8 BW x 2 1/2 D x 5 1/2 H Small Chesterfield Capital (Fits Pilasters up to 3 7/8 W x 1 D) Alder (2-Pack)

Modeled after original historical patterns and designs our carved wood capitals are beautiful accents to your complete millwork trim. Our wood capitals are hand carved finely sanded and can be easily painted or stained to match your existing millwork. more

Ekena Millwork 6 1/2 W x 4 3/8 BW x 2 1/2 D x 5 1/2 H Small Chesterfield Capital (Fits Pilasters up to 3 7/8 W x 1 D) Cherry (2-Pack)

Modeled after original historical patterns and designs our carved wood capitals are beautiful accents to your complete millwork trim. Our wood capitals are hand carved finely sanded and can be easily painted or stained to match your existing millwork. more

Ekena Millwork 16 3/8 W x 13 5/8 H x 3 7/8 P Angel Onlay Capital (Fits Pilasters up to 10 5/8 W x 1 D) (2-Pack)

Modeled after original historical patterns poly-urethane capitals provide the look of authentic wood capitals at a fraction of the cost. The capitals will not rot crack or split. Backed by a limited lifetime warranty urethane capitals are an ideal... more

Hubbell-Bell 5400-0 Extension Adapter 9.5 Cu-in 5-1/2 in L X 3-1/2 in W X 1-1/2 in D Die Cast Aluminum 5-1/4 x 3-1/2

Bell extension Adapter 9.5 cu-in 5-1/2 in length x 3-1/2 in width x 1-1/2 in depth 6 outlets single gang 1/2 in threaded hub die cast aluminum Gray CSA certified UL listed. Bell weatherproof single-gang extension adapters increase box capacity they... more

Hex Bolts Grade 5 Zinc Plated 1 1/2 -6 x 6 1/2 (Quantity: 1 pcs) Partially Threaded UNC Thread (Thread 1 1/2 ) x (Length: 6 1/2 )

Grade 5 Steel with a Zinc Finish and manufactured to ASME B18.2.1 Zinc-plated steel screws to resist corrosion in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 3.5 inches of thread... more

Hex Bolts Grade 5 Plain Finish 1 1/8 -7 x 2 1/2 (Quantity: 1 pcs) Fully Threaded UNC Thread (Thread Size: 1 1/8 ) x (Length: 2 1/2 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are FULLY threaded hex head cap screws Head Height:... more

Hex Bolts Grade 5 Plain Finish 1 1/2 -6 x 3 1/2 (Quantity: 1 pcs) Fully Threaded UNC Thread (Thread Size: 1 1/2 ) x (Length: 3 1/2 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are FULLY threaded hex head cap screws Head Height:... more

Hex Bolts Grade 5 Plain Finish 1 1/2 -12 x 4 1/2 (Quantity: 1 pcs) Fully Threaded UNF Thread (Thread Size: 1 1/2 ) x (Length: 4 1/2 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are FULLY threaded hex head cap screws Head Height:... more

Hex Bolts Grade 5 Plain Finish 1 1/2 -12 x 3 1/2 (Quantity: 1 pcs) Fully Threaded UNF Thread (Thread Size: 1 1/2 ) x (Length: 3 1/2 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are FULLY threaded hex head cap screws Head Height:... more

Hex Bolts Grade 5 Plain Finish 1 1/2 -12 x 5 1/2 (Quantity: 1 pcs) Partially Threaded UNF Thread (Thread Size: 1 1/2 ) x (Length: 5 1/2 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 3.25... more

Hex Bolts Grade 5 Plain Finish 1 1/2 -6 x 6 1/2 (Quantity: 1 pcs) Partially Threaded UNC Thread (Thread Size: 1 1/2 ) x (Length: 6 1/2 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 3.5... more

Hex Bolts Grade 5 Plain Finish 1 1/4 -7 x 2 1/2 (Quantity: 1 pcs) Fully Threaded UNC Thread (Thread 1 1/4 ) x (Length: 2 1/2 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are FULLY threaded hex head cap screws Head Height:... more

Hex Bolts Grade 5 Zinc Plated 1 1/2 -6 x 4 1/2 (Quantity: 1 pcs) Fully Threaded UNC Thread (Thread 1 1/2 ) x (Length: 4 1/2 )

Grade 5 Steel with a Zinc Finish and manufactured to ASME B18.2.1 Zinc-plated steel screws to resist corrosion in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are FULLY threaded hex head cap screws Head Height: 1-5/16 in. /... more

Hex Bolts Grade 5 Plain Finish 1 1/2 -6 x 6 1/2 (Quantity: 1 pcs) Made in USA Partially Threaded UNC Thread (Thread Size: 1 1/2 ) x (Length: 6 1/2 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 3.5... more

Hex Bolts Grade 5 Zinc Plated 1 1/2 -6 x 5 1/2 (Quantity: 1 pcs) Partially Threaded UNC Thread (Thread 1 1/2 ) x (Length: 5 1/2 )

Grade 5 Steel with a Zinc Finish and manufactured to ASME B18.2.1 Zinc-plated steel screws to resist corrosion in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 3.25 inches of thread... more

1 1/2-6 x 2 1/2 Hex Head Cap Screws Steel Grade 5 Plain Finish (Quantity: 15 pcs) - Coarse Thread UNC Fully Threaded Length: 2 1/2 Inch Thread Size: 1 1/2 Inch

When selecting a nut to be used for a graded hex cap screw keep in mind that the nut should have the same grade as the bolt/screw. For instance a Grade 5 Hex Cap Screw should only utilize a Grade 5 hex nut more

250PCS Self-Drilling Screws Assortment Kit Stainless Steel Hex Washer Self Drilling Metal Wood Screws 10 x 1/2 3/4 1 1-1/2 1-3/4 2 2-1/2 2-3/4 3

Size:#10 Self Tapping (250PCS) Color:Silver Material:Stainless Steel 410 Thread Size:#10 Package including: #10x1/2 x60pcs #10x3/4x50pcs #10x1 x30pcs #10x1-1/2 x30pcs #10x1-3/4 x30pcs #10x2 x20pcs #10x2-1/2 x10pcs #10x2-3/4 x10pcs #10x3 x10pcs Product... more

Hex Bolts Grade 5 Plain Finish 1 1/2 -6 x 7 1/2 (Quantity: 1 pcs) Partially Threaded UNC Thread (Thread Size: 1 1/2 ) x (Length: 7 1/2 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 3.5... more

Hex Bolts Grade 5 Plain Finish 1 1/2 -6 x 8 1/2 (Quantity: 1 pcs) Partially Threaded UNC Thread (Thread Size: 1 1/2 ) x (Length: 8 1/2 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 3.5... more

Hex Bolts Grade 5 Zinc Plated 1/2 -20 x 2 1/2 (Quantity: 50 pcs) Partially Threaded UNF Thread (Thread Size: 1/2 ) x (Length: 2 1/2 )

Grade 5 Steel with a Zinc Finish and manufactured to ASME B18.2.1 Zinc-plated steel screws to resist corrosion in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 1.25 inches of thread... more

Hex Bolts Grade 5 Zinc Plated 1/2 -20 x 2 1/2 (Quantity: 50 pcs) Made in USA Partially Threaded UNF Thread (Thread Size: 1/2 ) x (Length: 2 1/2 )

Grade 5 Steel with a Zinc Finish and manufactured to ASME B18.2.1 Zinc-plated steel screws to resist corrosion in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 1.25 inches of thread... more

Hex Bolts Grade 5 Zinc Plated 1/2 -13 x 2 1/2 (Quantity: 50 pcs) Partially Threaded UNC Thread (Thread 1/2 ) x (Length: 2 1/2 )

Grade 5 Steel with a Zinc Finish and manufactured to ASME B18.2.1 Zinc-plated steel screws to resist corrosion in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 1.25 inches of thread... more

Hex Bolts Grade 5 Plain Finish 1/2 -20 x 2 1/2 (Quantity: 50 pcs) Made in USA Partially Threaded UNF Thread (Thread 1/2 ) x (Length: 2 1/2 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 1.25... more

Hex Bolts Grade 5 Plain Finish 1/2 -13 x 2 1/2 (Quantity: 50 pcs) Partially Threaded UNC Thread (Thread Size: 1/2 ) x (Length: 2 1/2 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 1.25... more

Hex Bolts Grade 5 Plain Finish 1/2 -20 x 2 1/2 (Quantity: 50 pcs) Partially Threaded UNF Thread (Thread 1/2 ) x (Length: 2 1/2 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 1.25... more

Hex Bolts Grade 5 Plain Finish 1/2 -13 x 2 1/2 (Quantity: 50 pcs) Made in USA Partially Threaded UNC Thread (Thread Size: 1/2 ) x (Length: 2 1/2 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 1.25... more

Hex Bolts Grade 5 Yellow Zinc 1/2 -13 x 2 1/2 (Quantity: 50 pcs) Partially Threaded UNC Thread (Thread Size: 1/2 ) x (Length: 2 1/2 )

Grade 5 Steel with a Yellow Zinc Finish and manufactured to ASME B18.2.1 Zinc-plated steel screws to resist corrosion in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 1.25 inches of... more

Hex Bolts Grade 5 Zinc Plated 1/2 -13 x 2 1/2 (Quantity: 50 pcs) Made in USA Partially Threaded UNC Thread (Thread Size: 1/2 ) x (Length: 2 1/2 )

Grade 5 Steel with a Zinc Finish and manufactured to ASME B18.2.1 Zinc-plated steel screws to resist corrosion in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 1.25 inches of thread... more

Plumb Pak PP20965 Beveled Slip Joint Washer 1-1/2 x 1-1/4 in 1-1/2 x 1-1/2 in Polyethylene

Contains 1 each 1-1/2 x 1-1/2 and 1-1/2 x 1-1/4 . Bagged.nullnull SLIP JOINT WASHERS BEVELED - POLYETHYLENE more

Hex Bolts Grade 5 Yellow Zinc 1/2 -20 x 2 1/2 (Quantity: 50 pcs) Partially Threaded UNF Thread (Thread 1/2 ) x (Length: 2 1/2 )

Grade 5 Steel with a Yellow Zinc Finish and manufactured to ASME B18.2.1 Zinc-plated steel screws to resist corrosion in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 1.25 inches of... more

Hex Bolts Grade 5 Zinc Plated 1/2 -20 x 1 1/2 (Quantity: 50 pcs) Fully Threaded UNF Thread (Thread Size: 1/2 ) x (Length: 1 1/2 )

Grade 5 Steel with a Zinc Finish and manufactured to ASME B18.2.1 Zinc-plated steel screws to resist corrosion in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are FULLY threaded hex head cap screws Head Height: 5/16 in. / Width... more

Hex Bolts Grade 5 Plain Finish 1 1/2 -6 x 5 1/2 (Quantity: 4 pcs) Partially Threaded UNC Thread (Thread 1 1/2 ) x (Length: 5 1/2 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 3.25... more

Hex Bolts Grade 5 Zinc Plated 1 1/8 -7 x 2 1/2 (Quantity: 5 pcs) Made in USA Fully Threaded UNC Thread (Thread 1 1/8 ) x (Length: 2 1/2 )

Grade 5 Steel with a Zinc Finish and manufactured to ASME B18.2.1 Zinc-plated steel screws to resist corrosion in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are FULLY threaded hex head cap screws Head Height: 11/16 in. /... more

Hex Bolts Grade 5 Plain Finish 1/2 -20 x 1 1/2 (Quantity: 50 pcs) Fully Threaded UNF Thread (Thread Size: 1/2 ) x (Length: 1 1/2 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are FULLY threaded hex head cap screws Head Height:... more