You're in Building Supplies
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
Best Seller | This is a 3-1/2 in. diameter door cover plate. It will cover marred doors and allows a conversion from 2-3/8 in. to 2-3/4 in. backset, or 2-3/4 in. to 2-3/8 in. backset. | Prime-Line 3-1/2 In. Plated Back Plate 5.35 H x 3.75 W x 0.35 D in yellow, Brass... ... more | go to store |
This is a sliding patio door keeper. It is made of heavy gauge stamped steel that is zinc plated, with 3/4 in. mounting holes on center. The vertical slots to allow easy adjustment. Also features a 3/8 in. hook offset. | Prime-Line Stamped Steel,... ... more | go to store |
This is a vinyl-covered combination chain and spring that protects wood or metal outswinging doors from wind damage. It has an aluminum finish and is made from heavy gauge spring wire with a steel chain. It installs to the door and jamb to restrict the... ... more | go to store |
This deadbolt strike by Prime-Line Products is constructed of heavy gauge steel and it comes in an antique brass-plated finish. This heavy duty deadbolt strike replaces most deadbolt strikes and increases security with the 3-inch screws included within... ... more | go to store |
This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
This casement window operator is a right-handed, aluminum, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the... ... more | go to store |
This sliding patio door roller assembly is constructed from steel. It features a 1 In. ball bearing wheel with an adjustable steel housing. This type of roller assembly is quick and easy to install. | Prime-Line Single 1-1/8 in. Ball Bearing Roller,... ... more | go to store |
This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum... ... more | go to store |
This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are... ... more | go to store |
This deluxe, non-handed sliding screen door latch and pull is constructed of diecast metal and it comes in a chrome plated finish. It is a surface mounted latch and keeper, designed for interior installations. Can be used on both single and double... ... more | go to store |
These standard latch strikes are constructed of steel and come in a brass plated finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 in. fasteners included with... ... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is... ... more | go to store |
These standard latch strikes are constructed of steel and come in a matte black finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 in. fasteners, included with... ... more | go to store |
These door viewers are constructed of diecast housings and solid brass end caps, and they come in optional plated finishes. The lenses of these viewers are made of glass and they feature a 130 degree angle of view. These viewers can be installed on... ... more | go to store |
These door latch strike plates are constructed of stamped steel and come in a satin nickel finish. They feature an adjustable tab to allow for best engagement of the door latch, and they are used to replace most interior and exterior residential latch... ... more | go to store |
This sliding glass door roller assembly is constructed from steel and features height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and... ... more | go to store |
These standard latch strikes are constructed of steel and come in a antique brass plated finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 in. fasteners... ... more | go to store |
This is a sliding patio doorkeeper. Diecast construction and chrome plated. It has a universal design and will fit a variety of door latches. | Prime-Line Chrome Plated Diecast, Sliding Door Keeper (Single Pack) 5.4 H x 3.75 W x 0.7 D in White | 5.4" H... ... more | go to store |
This door hole cover offers a cheap and reliable alternative to purchasing an entirely new door. It is constructed from heavy-gauge steel and comes in a matte black finish. It features a diameter of 2-5/8 in. covering holes anywhere from 1/2 in. to... ... more | go to store |
This is an diecast plain back patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The dimensions are 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a 10-32... ... more | go to store |
These aluminum screen hanger sets by make-2-fit are constructed of aluminum and steel components and come in a corrosion-resistant, bronze-plated finish. Included with these sets are two screen hangers, one spline channel bail latch, a ball-head screw,... ... more | go to store |
These aluminum screen hanger sets by make-2-fit are constructed of aluminum and steel components and come in a corrosion-resistant, bronze-plated finish. Included with these sets are two screen hangers, one spline channel bail latch, a ball-head screw,... ... more | go to store |
This is a stainless steel S-tab tandem roller assembly used by Fleetwood and a variety of patio door manufacturers. It has an stainless steel inner housing with two inline 1-1/2 in. concave or grooved stainless steel ball bearing rollers set in a... ... more | FREE shipping go to store |
Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This right-handed sliding screen door latch and pull is constructed of diecast and it comes in a beautiful chrome plated finish. It is a surface-mounted... ... more | go to store |
Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This right-handed sliding screen door latch and pull is constructed of diecast and it comes in a beautiful chrome plated finish. It is a surface-mounted... ... more | go to store |
Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This left-handed sliding screen door latch and pull is constructed of diecast and it comes in a beautiful chrome plated finish. It is a surface mounted... ... more | go to store |
This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame | Prime-Line Diecast, Keyed... ... more | go to store |
This casement window operator is a right-handed, aluminum, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the... ... more | FREE shipping go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It is 3/4 in. wide with a 27/32 in. flare, 1-5/8 in. tall and 1-1/2 in. long (not including the inner roller housing). It is rear adjusting... ... more | go to store |
These rim cylinder locks are constructed of a heavy-duty zinc diecast housing and come in a brass plated finish with 5 pin tumblers. This item includes 2 keys, 1 cylinder, 1 trim ring and 1 mounting plate with 2 fasteners. NOTE: The keys are designed... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide, 1-1/4 in. tall and 2-3/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The housing is 3/4 in. wide with a 7/8 in. flare and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end. It is... ... more | go to store |
These wall brackets are constructed of zinc alloy (cast Zamak) and they come in a chrome plated finish. This repair kit includes a total of two (2) U-brackets, and two (2) two-ear wall brackets, together with all the fasteners necessary for their... ... more | go to store |
This maximum security combination strike is constructed of stamped steel and it comes plated in a satin nickel finish. It features slightly taller latch and bolt openings to accommodate door hardware spaced from 5-1/2 in. to 6 in. from center to... ... more | go to store |
This Prime-Line E 2171 Steel Round-Faced Mortise Latch with Vertical Keyway Lock has a rounded-end, steel face plate. The keyway stands in a vertical position with hook fully extended when in the locked position. The hook projection of the sliding door... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on top. Used by Fleetwood and a... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 23/32 in. wide with a 3/4 in. dimple width and 1-3/16 in. tall. It is rear adjusting with a threaded... ... more | go to store |
Ads related to Prime-Line 2-1/8 in. Stamped Steel Brass Plated Adjustable Strike Single Pack 5.35 H x 3.75 W x 0.45 D in Plated Finish | Wayfair U 9486